CIRCULATING OIL

OILPRO INDUSTRIAL EP GEAR OIL is a premium quality non-lead general purpose extreme pressure industrial gear oils made from highly refined base stocks and compounded with additives to impart special film strength, anti-wear, oiliness, anti-oxidant, corrosion inhibitor, and foam suppressant characteristics.

OILPRO™ ADVANCED Premium Rock Drill Oils are
formulated with high-quality base oil and a premium
additive system designed to provide superior performance
in air-powered equipment. They are formulated to give
maximum protection from component wear in severe
service conditions.

OILPRO™ ADVANCED Premium Rock Drill Oils are
formulated with high-quality base oil and a premium
additive system designed to provide superior performance
in air-powered equipment. They are formulated to give
maximum protection from component wear in severe
service conditions.

OILPRO™ ADVANCED Premium Saw Guide Oils are blended with
premium paraffinic base stocks and specially selected additives to reduce friction between the saw and guide in thin Kerf Saws. They promote longer saw guide and saw blade life when operating in severe service.

Shell Morlina S3 BA 100 is a premium quality rust and oxidation inhibited lubricating oil. It is designed to have appropriate viscosity/temperature characteristics, low foaming tendencies, and excellent water separation properties.

Shell Tonna S2 MX 220 is an oil that is designed for the lubrication of machine tool slides, tables, and feed mechanisms. It has enhanced tackiness and stick-slip characteristics. It is recommended for use in cases where there is high exposure to soluble cutting fluids.

Shell Heat Transfer S2 X is a premium quality heat transfer fluid for use in indirectly heated closed heat transfer systems. It is based on highly refined mineral oils that resist oil cracking, oxidation, and thickening. It also contains an oxidation inhibitor to provide a long service life.

Shell Omala S2 GX 100 is an extreme-pressure (EP) oil designed for the lubrication of heavy duty industrial gearboxes. It has a high load carrying capacity, protection against micro-pitting, and is compatible with seals and paints. It also offers good corrosion protection and water separation.

Shell Turbo S4 GX 46 is a lubricating oil used in steam, gas, and combined cycle turbines. It’s designed to protect highly loaded gearboxes and provide enhanced anti-wear performance. The oil is based on Gas-to-Liquid (GTL) technology and is resistant to degradation, even under high oxidative and thermal stress.

Shell Morlina S2 BA 100 is a high performance oil designed to provide excellent lubrication and protection for challenging industrial bearing and circulation systems.